Daniel Defense DDM4 M4A1 5.56x45mm NATO 14.50″ Barrel Semi-Auto Rifle (30+1)
$2,240.00
The Daniel Defense DDM4 M4A1 5.56x45mm NATO 14.50″ Barrel Semi-Auto Rifle (30+1), AR15 style firearm, features the RIS II picatinny quad rail, which has been in use by US Special Operations Command (SOCOM) for the SOPMOD Block II program since 2005.
Daniel Defense DDM4 M4A1 5.56x45mm NATO
The Daniel Defense DDM4 M4A1 5.56x45mm NATO 14.50" Barrel Semi-Auto Rifle (30+1), AR15 style firearm, features the RIS II picatinny quad rail, which has been in use by US Special Operations Command (SOCOM) for the SOPMOD Block II program since 2005. The DDM4 M4A1 5.56x45mm NATO is built around a 14.5 inch Cold Hammer Forged M4 Profile barrel with a permanently attached Daniel Defense Flash Suppressor. The DDM4 M4A1 5.56x45mm NATO is built with an independently ambi GRIP-N-RIP Charging Handle, which accommodates left- and right-handed shooters. The DDM4 M4A1 5.56x45mm NATO is available with an FDE rail as well as our Mil Spec + Cerakote. This rifle also comes with the ergonomic Daniel Defense Buttstock and Pistol Grip.
Daniel Defense DDM4 M4A1 5.56x45mm NATO Broken Down
LOWER RECEIVER: Mil-Spec with Enhanced Flared Magazine Well and Rear Receiver QD Swivel Attachment Point. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
UPPER RECEIVER: Mil-Spec with Indexing Marks and M4 Feed Ramps. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
BARREL: Chrome Moly Vanadium Steel, Cold Hammer Forged, 1:7 Twist, 14.5" M4 Profile, Chrome Lined, Mil-Spec Heavy Phosphate Coated, and HP/MPI Tested
GAS SYSTEM: Pinned Low Profile Gas Block CNC Machined of 4140 Hardened Steel with Mil-Spec Heavy Phosphate Coating, Carbine Length, Direct Impingement
MUZZLE DEVICE: Pinned and Welded Daniel Defense Flash Suppressor, Extended, 17-4 PH Stainless Steel, Salt Bath Nitride Finished
BOLT CARRIER GROUP: M16 Profile, Mil-Spec MP Tested, Chrome Lined, Properly Staked Gas Key
BUFFER: H Buffer
SIGHTS: Sold Separately
HANDGUARD: Daniel Defense DDM4 Rail 12.0, CNC Machined of 6061-T6 Aluminum, Type III Hard Coat Anodized
CHARGING HANDLE: GRIP-N-RIP Charging Handle, Body CNC Machined of 7075-T6 Aluminum, Handles & Latch CNC Machined of 6061-T6 Aluminum, Heavy Duty Stainless Steel Roll Pins, Type III Hard Coat Anodized
RECEIVER EXTENSION: 6 Position Mil-Spec 7075-T6 Aluminum
BUTTSTOCK: Daniel Defense Buttstock, Glass Filled Polymer with Soft Touch Overmolding
PISTOL GRIP: Daniel Defense Pistol Grip, Glass Filled Polymer with Soft Touch Overmolding
RAIL PANELS: Daniel Defense Rail Panels made from Santoprene, heat resistant to 300° F.
Made in the USA!
Guaranteed Satisfaction
All Daniel Defense products carry a 100% satisfaction guarantee against defects in original materials and workmanship. If your Daniel Defense product shows evidence of such defects, Daniel Defense will make every accommodation to fix, repair, or replace your product in the most expeditious manner possible. Daniel Defense does not warranty products or damage caused to our products by the correct or incorrect installation of other manufacturer's products.
FEATURES:
- Brand: Daniel Defense
- Series: M4A1
- Caliber: 5.56x45mm NATO
- Model: DDM4
- Stock Finish Group: Black
- Capacity: 30+1
- Stock Material: Synthetic
- Action: Semi-Auto
- OAL: 31.50"- 34.75"
- Hand: Right
- Sights: Optic Ready
- Barrel Finish: Black Phosphate
- Muzzle: Flash Suppressor
- Twist: 1:7"
- Gun Platform: AR-Style
- Magazine Type: OEM
- Grips: Black Polymer
- Includes: Hard Plastic Case
- Receiver Material: 7075-T6 Aluminum
- Safety: Ambidextrous
- Thread Pattern: 1 / 2"-28 tpi
- Stock Description: 6 Position with SoftTouch Overmolding
- Barrel Description: Chrome-Lined Cold Hammered Forged
- Barrel Length: 14.50"
- Max Capacity: 30
- Receiver Finish: Black Hard Coat Anodized
- Trigger: Mil-Spec
- Weight: 6.74 lbs
- Stock Finish: Black
- Handguard Finish: Flat Dark Earth
Additional information
Weight | 9 lbs |
---|---|
Dimensions | 43 × 11 × 4.1 in |
Barrel Description | Chrome-Lined Cold Hammered Forged |
Muzzle | Flash Suppressor |
Barrel Length | 14.50" |
Capacity | 30+1 |
Trigger | Mil-Spec |
Safety | Ambidextrous |
OAL | 31.50"-34.75" |
Weight | 6.74 lbs |
Stock Description | 6 Position w/SoftTouch Overmolding |
Receiver Material | 7075 T6 Aluminum |
caliber | 5.56x45mm NATO |
Action | Semi-Auto |
Twist | 1:7" |
Barrel Length Range | 14" to 14.99" |
Weight Range | 6 lbs to 6.99 lbs |
Hand | Right |
Stock Finish Group | Black |
Metal Finish Group | Blued/Black |
upc | 815604015547 |
Brand | Daniel Defense |
Sights | None, Optic Ready |
All firearm purchases require valid U.S. government issued ID and related firearm paperwork. Age and residency restrictions apply. You must meet all other requirements as set forth by applicable Federal, state and local statutes, rules and regulations for firearm purchase. Other terms and conditions may apply. It is your responsibility to ensure that you are in compliance with all applicable laws, rules and regulations for the purchase of firearms.
Shipping Policy
View Now
Return Policy
View Now
Reviews
There are no reviews yet.